The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A hole in my Volvo 240 LH-Jet 2.4 -016 AMM/MAF 200

One my last few junkyard runs in Slumkane, WA found perhaps the newest version of the Bosch Volvo 240 LH-Jet 2.4 AMM 0280212016.

I have a half-dozen or so, I guess, of these 016 AMMs.

This one appears to have the newest innards with the beefy heat sink and the Y-thingy with the thin 'blade' across it upstream of the actual wire. My small collection represents three distinct design variations inside the wind tunnel part of the AMM.

Where you secure an AMM to the bracket, I found the bolt driven through the bottom of the boss(?) or well. That small anodized sleeve that resides inside the rubber cushion was missing.

I mean to remove the rear screen, remove the plastic piece dislodged from the puncture, and use emery paper to rough it up inside and press the adhesive inside the well (or boss?) bottom, yet not above where the securing bolt would reside had the sleeve been there to prevent this from happening when some unknown PacNW denizen did this.

How would you repair this?

I don't want chunks dislodging inside the thing. Yet want to try this newest one, of hopefully not fried from the hot side open flap valve on the 240 I removed it from.

I also mean to try some of the CRC MAF Sensor Cleaner spray on this and the other two AMM as I replace the three air filters.

Of course I'll test the voltages as I put everything back together. The 1991 uses the same AMM that came with it when I bought it in June 2000. Or maybe not. I forget.

Thanks. Enjoy the images.

MacDuffy's Tavern.












--
Give your brickboard.com a big thumbs up! Way up! - Roger Ebert.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.