The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

92 240 loud scraping sliding sound while starting. Starts eventually. 200 1992

I have done a few so do not expect these results, but when I did it on my 1990 (slightly different bolt heads than yours) I had the old one out in less time than it took me to get it on the ramps.

If I remember correctly I used a shallow 3/8" drive socket, 3/8-1/2" adapter, 24" 1/2" drive wobble extension, 12" 1/2" extension, cheap battery impact wrench (all others before I did with a breaker bar and 1/2" ratchet).

Disconnect negative terminal on battery
Disconnect solenoid and main positive terminal on starter
Attach socket to upper bolt
Thread extension combo up to socket and wiggle it around until it is in place (this runs the length of the transmission at an angle)
While holding extension so nothing drops off, wriggle back to where you can get the wrench on it
Loosen upper bolt completely
Remove remaining bolts






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.