The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'89 240 barely idling, gas in exhaust 200 1989

First, make sure the oxygen sensor is getting heated. That voltage comes from fuse 4, so if there's a problem there, you'll get the 212 and no tank pump. The electrical heater is necessary. Then give it a new sensor. A universal is OK if you want to fool with the splice kit in trade for the $$, but anything you might hear on the internet about using an unheated sensor back where yours is... well you heard it on the internet. What can I say.

And when you check for codes, get them all. Don't stop with the first one that reads out. And reset the ECU after you get the codes by lifting out the 25A fuse momentarily.

--
Art Benstein near Baltimore

“The single biggest problem in communication is the illusion that it has taken place.” George Bernard Shaw






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.