The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

In need of 79' K-JET wiring diagram 200 1979

I am bit confused why anything from the k-jet would/could be retained. Outside of the in-tank lift pump, potentially the fuel pump relay (unlikely) and coolant temperature sensor...only the tachometer feed would be compatible.

You will need to figure out a couple of crucial incompatible item and Turbobricks might be your best place but Art B could potentially also help. You need the tone ring and sensor from the 940 axle (likely the whole axle) and wiring to feed the ECU that signal.

If you are NOT keeping the '79 transmission you will have to figure out how to feed the speedometer or more likely replace it as it is cable driven.

I am sure you also realize that the O2 sensors are also incompatible but I would hope you are going with a custom exhaust instead of splicing into the tiny B21 pipe.

My 1979 wagon is still my favorite daily driver ever so this sounds like a great project.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.