The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Mechanical Speedo Power Source 200 1985

uid 57475's pic
posted by  xDread92x on  Fri Sep 16 13:10 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Still unsure how to respond directly to your post.

I already checked voltage on the gray wire when cluster was working last week. I got 0 for voltage at cluster gray wire pin while cluster was on and connected. Voltage was coming off the stabilizer. 12.38, 9.96 I believe. The battery light wire (blue/red) was giving off over 12V and the brown wire (parking brake switch) was giving off like 2.68 set.

So I believe the issue may be in the harness. I also replaced the old sending unit with one from a 92 so I do not believe that is the culprit. I also got 0 at the sending unit connector for the gray wire.

My gas gauge has jumped before and worked for a few seconds in the past.

Thanks.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.