The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Worried that I blew my head gasket 700

Ok so I'm pretty sure I am running on 3 cylinders.

I put the plugs back in, started it up, and pulled the plug wires one by one. Pulling the wire for cylinder #2 had no effect on the way the engine ran while all other wires did. And cylinder #2 was the spark plug that had no fuel smell on it. Also, all wires made spark when I touched them to the heat shield.

Not sure what is wrong there but I think that cylinder #2 is not getting fuel. I tried to feel the injectors for clicking while the car was running but couldn't feel the click on any of the injectors, I will try to listen with a screwdriver though.

Is it reasonable to think that my ballast resister is not functioning properly? For a long time I have been running with two of the wires connecting to the ballast resistor soldered on there.

Any further help is much appreciated.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.