The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Continuous Hesitation 200 1990

Hi,

This is just an off hand thought but it sounds like thermal expansion could be the knock. The exhaust system come to my mind. I know after a shut down you will hear the pipes cooling down. That's mostly heat shields.
If they get loose they can buzz at certain RPM. You may also check the bracket down near the transmission that hold the exhaust pipes. It can crack or lose it bolts.

Since this engine was replaced, that in its self, could warrant an inspection underneath.
Since you are having hesitation under acceleration there may be a blockage or restriction in the exhaust flow.
First thing that comes to mind would be a catalytic converter that has collapsed internally. Sometimes the chunks of honeycombs can travel into the mufflers. Mufflers can collapse from rust too.

I sincerely doubt an electrical relay can cause any knocking but they do click! (:-) Now a great big 100 ampere, three phase electrical contactor clunks.

Phil






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.