The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Blinking arrow and WSE switch! 900

Hi guys,

I have 1995 (manuf. late 1994) volvo 960. It is in limp mode (blinking arrow and mode selector switch (WSE) flashing. I had read the codes and they are:

A1 232 missing speed signal

A1 114 mode selector circuit faulty (not 313 for PNP).

The RPM, Speedometer cluster works normally, no engine light, no ABS lights. I drained and replaced the transmission fluid, earlier I got another code (332) faulty SL solenoid, which I replace with new one, and now this code is cleared.

I tested the green-gray wire from the instrument cluster to the TCM and showed continuity with resistance Ohms change from 1 to 0.01.

I cleaned the rear diff. sensor and it seems ok.

I cleaned the PNP switch and evened the teeth inside. although I didnt have any issues with getting out of park, no starting, or no reverse light.

I ordered WSE switch, put I am really puzzled now! The car has only 91000miles






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.