The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

temp sender 120-130

posted by  Ron Kwas on  Mon Mar 20 04:22 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:03 CST 2014
[RELATED]

David;

I agree with Danny...the overnut seals onto the upper flat surface on the (brass) Temp Sensing Bulb, and pushes (and seals its lower conical seat into a matching conical seat in the head...these should be clean for good sealing)...trick is to seal the overnut to head threads, but NOT to unite the TSB with the overnut by gooping between the two with sealer...when the sealer is baked on and the two are united, it will cause the capillary tube to twist when loosening it next time...very undesirable! I even put just a little graphite grease between the TSB and overnut to prevent locking the two together...

Good Hunting!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.