The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

92 93 240 A/C Low pressure switch and connector - diagnosing reparing replacing 200 1993

So I've got two bricks with almost the same problem - both have either faulty low pressure switches or the connector plug/wiring is the problem. Sometimes the A/C works and sometime it doesn't. Fiddling with the connector (removing/replacing) or bending the wires at the connector will sometimes get the A/C going. Sometimes. Usually works best when first starting up, not when it's warm/hot. And when it's working, the switch/connector/wiring problem usually will cause the A/C system to shut off/on several times a minute, causing the engine to hesitate momentarily as the A/C clutch cycles on/off.
Questions: I assume replacing the switch requires evacuating the system and recharge? Any tips on repairing/replacing the connector and wires? I've tried some electric clean spray and dielectric grease, but that wasn't enough.
Thx in advance BB's!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.