The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stuck strut tube gland nut 200 1992

Hi everyone,

I have been wrestling with a stuck gland nut on the drivers side of our 92 245. I have done front supension work on my 90 244 before and I had trouble but not like this.

After the gland nut wouldnt budge with groove joint pliers, pipe wrenches, locking chain pliers, hammer and chisel, hammer and punch, air hammer/chisel, map gas heat, pb blaster, kroil, synth trans fluid/acetone penetrant mix and I am starting to come up empty on ideas.

I tried all the above when at first the strut was on the car then I removed it and worked on it with the help of a vise.

I also tried the two pipe wrench/body weight method outlined in the 700/900 faq.

At this point the nut is fairly mangled.

I am thinking about drilling down thru the top of the nut at a few areas and work at it with a grinder and/or air die grinder and maybe hammer and chisel. Anyone have any luck surgically removing one of these?

Thanks,

Travis






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.