The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to remove headrest hardware from seat back 120-130

"Is this possible or do I have to remove everything?"

No, you shouldn't have to remove the upholstery (see below).

"By black plastic nut, do you mean the knurled nut that you tighten to adjust the height of the headrest?"

No, after removing the headrest, adjusting nut and small locking ring, there is an additional knurled nut. I forgot to mention there is also a large plastic washer under the second nut.

"In order to push the metal tube up, does the vinyl and foam have to be removed?"

No, you can remove the hog rings at the bottom of the seat cushion and reach inside.

"From the sound of this, the seat cover and foam have to be removed to gain access to the bottom end of the black plastic bushing. Am I wrong?"

Yes.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.