The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Toe in specs

I am still chasing the front end shimmy that I thought I might have resolved:

https://www.brickboard.com/RWD/volvo/1647031/740/760/780/front_end_shimmy.html

It is back and I continue to chase..

In checking (and double checking) the measurement difference from the front of the tires to the back of the tires (or as close as I can get without chassis interference) I have 3/16" toe in. That seems to be too much. My failing memory seems to recall a setting of 1/16"" but I am unsure. Specs on line are given in degrees and I don't know how to convert against my measurement.

When I replaced the tie rod end recently I counted threads and feel that I now have the same toe in as was present with the old tie rod end.

Using my "ball park" method what would be a reasonable amount of toe in?

Thanks,
Randy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.