The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Driver's side brake pads hanging up/not retracting

This actually a continuation of my last post:
https://www.brickboard.com/RWD/volvo/1647730/toe_specs.html

The rotor on the driver's side front didn't have enough meat left for turning. I installed a new rotor and the shimmy when applying the brakes was gone. However, the pads were not retracting enough and the new rotor was getting much hotter than the passenger's side.

I thought it might be the brake hose had collapsed so I replaced it. No change in the pads dragging. So it seems that the piston is moving freely (using adjustable pliers) and the pads are not hanging up in the carrier. There is no pressure evident when I open the bleeder valve and opening the bleeder does not allow the rotor to turn freely like the passenger's side.

So I am down to caliper replacement unless someone has any differing opinion. Any thoughts appreciated.

Randy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.