The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Charcoal Canister 1800 1970

Was adding some DRLs and doing some maintenance on my K&N filter and decided to paint the charcoal canister while I had the grill off. When I removed the foam from the bottom of the canister, there were a bunch of charcoal granules on top of it. I assume that whatever screening was inside to retain them had deteriorated, so I simply turned the thing upside down and let them flow back through the perforations in the bottom plate before fitting a new piece of foam. After paining it, and it's bracket, I carefully placed some waxed paper between the two before tightening. You can't see it, but i hope it will prevent the fresh paint on the two from bonding together. Can anyone opine on the topic?

Is this thing still really doing anything? Can it be refreshed (e.g. heated in an oven) Replaced? Bypassed?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.