The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Separation Flywheel and Torque Converter (bolts removed!) 700 1987

Hello, driving a 1987 Volvo 765. We removed the whole engine for check-up, cleaning and restauration. We first intended to keep the torque converter stuck to the transmission; however it came out with the engine despite having removed the four bolts.

Now that the engine is removed, we are still unable to separate the torque converter from the flywheel, and we have completely run out of ideas. The four bolts attach the torque converter to the flywheel and we removed all of them. We tried to crank, push and pull the torque converter, but it is totally stuck and does not move a bit. Here are three pictures showing the situation:

https://i.imgur.com/Jz36hCR.jpg
https://i.imgur.com/gAwWKt0.jpg
https://i.imgur.com/WdSagkE.jpg

Did anyone ever experience that problem and found a solution? We would be very thankful for any help!

Kind regards






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.