The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How do I access the 'reverse light' switch to replace it? ... manual transmission 200 1988


You can lower the gearbox on that side a bit. Complete removal is not necessary.

I'm going on memory here but I seem to recall using a 13/16" spark plug socket and short or medium extension.

If you are lucky it will just be a wiring problem. I have found that the new style switch for current models, which works in theory for the older models, doesn't extend into the case far enough to make contact unless I manually hold the shift lever all the way left. This was what I encounterd on my '89. I think if I removed the copper gasket and used some sealant that might be a cure. Or maybe find a thinner gasket or crush ring. Hopefully your switch will be okay or you can find an earlier style replacement.


--
'80 DL 2 door, '89 DL Wagon, '15 XC70 T6






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.