The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

#2 coil not firing, all others OK S90-V90

posted by  someone claiming to be dougieslugie on  Tue Jun 12 10:53 CST 2018 [RELATED]

hello good people of the brickboard. I am currently woring on a 97 V90 that indicates a check engine code of P0302 (cylinder #2 misfire) upon initial
diagnosis I found the #2 coil not firing at all, and swapping with several known good coils, no coil will fire in the #2 position. I measure 12V at pin 15(+) of the coil, but it seems no ground pulse from (and here I'm in unfamiliar territory)
the ignition module is getting to pin 1(-) of the coil. I am assuming that wire
is broken some where in between. I am hoping to simply run a new wire from the ignition module to the #2 coil, but I need wiring diagrams with pin outs of the module, and the location of the module to complete the job. I welcome your
comments, and suggestions, and any helpful info. thanks






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.