The message to which you are about to reply is shown first. GO TO REPLY FORM
|
|
|
Original post regarding no cooling and the fix thanks to Brickboard help:
https://www.brickboard.com/RWD/volvo/1656235/940/960/980/V90/S90/ac_problem.html
The AC worked for about a day and then gave up. Jumpering the pressure switch failed to engage the compressor. Applying 12v directly to the compressor engaged the clutch and cooling began.
Some years ago I had a 91 745 with similar behavior and it was a bad solder joint in the control unit. The control for the 94 is the same. After digging it out of the dash I took it to the bench and opened it up. With a magnifying glass and strong light I could see that the joint pictured in the FAQ's did indeed look suspect.
https://www.brickboard.com/FAQ/700-900/HeatingAirConditioning.htm#MCCClimateControlACNotWorking
Reflowing that joint restored normal function to the system.
There are two tabs on the bracket that angle up on the bottom two holes of the control unit. They prevent easy extraction of the control unit making it necessary to remove everything above the ashtray to finally remove that bracket to free the control unit. I was going to cut off those two angled pieces before putting things back together but I forgot to do that. With those cut off it would be simple to remove the control unit from the dash should it ever again necessary.
|
|
* = Field is optional.
+ = Enter space delimited labels for this post. An example entry: 240 muffler
©Jarrod Stenberg 1997-2022. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.