The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Trouble clearing SRS Airbag Code 5 from 240 Classic 200 1993

posted by  Oleseahorse on  Wed Nov 21 12:34 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:45 CST 2014
[RELATED]

This was in the faq's

A common problem is corrosion of the contacts on the yellow or orange power connector for the crash sensor under the carpet on the transmission tunnel. If the procedure to reset the fault codes doesn't work, make sure the contacts are clean and then try to clear the codes again. If the SRS light comes back on, the problem is probably another component or even low battery voltage. Faults must be cleared for the light to go out.

Could someone tell us exactly where that connector is and best way to get at it? ie remove seats,etc.

Thanks

Marty







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.