The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Carefull before jump start at starter 200 1992

posted by  Rolandp on  Thu Jan 31 18:46 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 15 17:36 CST 2014
[RELATED]

Today I tried to reproduce the event ( solonoid would engage but not turning rotor ).

May be it was not cold enough ( 0°f ) or the rotor fudged condition was gone for now.

Anyhow I did the modification Phil suggested above.

I took the dremmel with cutting disk and cut the two welding tacks on the plunger, tried to push the rod with a vise but it would not move.

I then used a hammer and got it moving to almost close the dremmel cutting disk groove. After I re-welded the two tacks on the plunger.

Tested OK and put aside as a spare.

Many thanks Phil

And I hope you have a good stove these days (if you live in the mid-west right now).






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.