The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B30 water pump woes. 140-160

Eric,

I am working on seeing if I can get an actual thickness on the stock head gasket but if I am not mistaken the B30a in the C303 should be the same thickness as those used on the carb version of the 164. My particular variant runs the Stromberg 175 CD2-SE carbs.

It could very well an issue with quality of pump used I won't deny that. The mating surface seems to be rougher than I would expect on a pump machine surface. Let me ask this. The GMB pumps have a flat/smooth mating surface? Also are they aluminum?

The question in regards to the top seals..it's a confusing one. Larger vs smaller isn't really working if there are more than two sizes. It would be nice to know what the actual size in height each seal should be based on B30a/e/f variants. This should only pertain to stock units and not altered B30's






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.