The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B30 water pump woes. 140-160

.7mm compressed is the thinnest, B30E gasket, so the shortest O-Rings on top.

You sound like you know what you are doing, I have to ask where was the leak coming from on the old pump? If there was no leak from the weaphole, then there is nothing wrong with the pump. The heater pipe on the side, is it not too rusty for it's ring? Is there a chance the leak is from the headgasket along the side under the manifold which is running around to the front? I don't know what angle the motor is mounted having not been lucky enough to see one in the flesh.

The O rings need nothing, luckily Hylomar does no harm. A tiny amount of hylomar is all the gasket needs and NEVER use silcone garbage on a donk.

Also, does it leak without pressure? I've never run a pressure cap on a B18/B20/B30 powered car, but you would need one for 4wd.








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.