The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Random weird stall, then won't start then will start 200 1992

Update - I went ahead and replaced the wire harness to the speed sensor from the connector under the floor board (it's inside a weird plastic little connector box stuck to the underside of the floor board with a gob of black elephant snot) to the speed sensor, soldering in new wires at the connectors which are in good shape. Also removed the speed sensor to check it, but no apparent damage damage. Test drove about 1/2 hour, ran fine, no skips or stalls but got the 3-1-1 code again. Swapped out the instrument cluster for the one in my 93 and reset codes. No codes set on my 18 mile drive to work, but the 3-1-1 code was set again after I got home. Swapped the 92 cluster back in and reset the codes. Yes I'm going to do the CPS next, but wanted to rule out the wiring first and the instrument cluster.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.