The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Generator Mounting questions 444-544

It is not uncommon for both the generator end plates and the generator engine mounting bracket to get damaged over time. The holes get elongated by the 3/8" bolts especially if they aren't tightened properly.

If either the end plates or the mounting bracket holes are badly damaged, the generator pulley will not be inline with the crankshaft and water pump pulleys and that can cause belt noise as well as premature generator bearing wear.

The generators that were rebuilt by Bosch would come with new end plates, but since Bosch discontinued rebuilding them, it's hard to find decent replacements.

New mounting brackets are still available, and so are the mounting bracket rubber grommets.

--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.