The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Temp reads high after tcb bypass 200

posted by  someone claiming to be macs70GLT on  Wed May 29 19:41 CST 2019 [RELATED]

I flushed the coolant, replaced radiator hoses and thermostat (though it's a Murray brand w/o the bleeder pin thing), I also put on the jumper wire between pins 1 & 3 where the temp compensator board was installed.

Once warmed up, within 7 to 10 min, the temp gauge is at 10:00, just below the red.

I'm assuming this is not normal correct?

Once I get the car back tonight I'll check the wire to temp sensor.

Is there a way to check the water pump?

The upper radiator hose gets very hot, lower hose hot at pump and eventually gets warm at radiator.

I believe it's getting flow through radiator so am wondering about the pump.

Thanks for your insights.

Mike






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.