The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

MAP tubing on a Regina 740 700

Hi all. 1990 740 NA rex/regina:

I'm new to Regina, and to MAP sensors. I'm trying to get this car into better working order, and there is a rough transition from idle to off-idle. It's like a delay when you open the throttle, even though the TPS is adjusted and working. The engine hesitates substantially, and then revs after a split second of the throttle being open, unless it's opened very slowly. I haven't dug into it too deeply, but the tubing for the MAP sensor (mounted on the driver strut tower) was clear vinyl and seemed definitely wrong to me. I have a suspicion that the tubing is very important for this sensor.

What type of tubing is OEM? I've seen mention of 90-degree elbows. I'm imagining some 90-degree rubber elbows and that semi-rigid small-orifice plastic tubing - sort of like what's used on the heater vent.

Does anyone have a photo of theirs if it's the original line?

Thanks!
Can't wait to get back behind the wheel of a brick :)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.