The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1994 940t power seat curiosity 900 1994

posted by  spook on  Fri Jun 14 19:50 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:06 CST 2014
[RELATED]

Dear greenvolvo,

Hope you're well. You may be right as to the relay. The limited movement may over-heat the relay, causing it to cease working.

I think the cable needs to be extended by perhaps 1/4", by putting a short steel pin - I used a section of a finishing nail, slightly narrower than is the cable - inside the cup at the end of the motor. If the tip end of the cable has become rounded - it should be square - a file can be used to square the end. The steel pin will push the squared end into the drive gear, and so promote reliable power transmission.

A rounded cable tip could disengage from the drive gear, if there's a bit of resistance due to crud in the tracks or in the rack gear.

Hope this helps.

Yours faithfully,

Spook






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.