The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Leaking water pump 200 1988

posted by  someone claiming to be CB on  Thu Aug 1 21:43 CST 2019 [RELATED]

Where exactly is the pump leaking? From behind where it is bolted to the block?
From above where it mates wih the head? From behind where the heater return pipe is pushed into that outlet on the pump?

Did you polish the mating surface on the block before installing the replacement pump?
Did you, using a small mirror, check for and clean/polish the matting surface on the head; where that "mushroom" seal at the top of the pump meets the head?

FYI, using sealant on the WP gasket opens you up to the following risk: Some of that sealant gets squeezed out to the edges and may drop off and get circulated around and end up in the radiator blocking the channels. (ask me how I know this!)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.