The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

P1800 ES

Rob;

"...the question is what is causing me to lose 1.5V and how do i fix??" ...10.5V could very well be the voltage Battery is dropping to under cranking load, and this is absolutely typical and normal! Repeat test while measuring voltage at Battery to confirm. ...so when bus voltage drops like that, that is all your going to see when measuring ANYTHING else in vehicle, including FI components.

" Apperas 10.5V is not enough to actuate the motor in the CSV." I expect it should be without doubt, as this (Bat V drop during cranking) is as I said: Absolutely normal!!

"I disconnect and reconnect CSV's directly to battery, the residual fuel in the valve ejects......ie both valves test good." What do you mean by "good"?...I want to hear that when it was on Fuel Rail which was charged with fuel, and CSV was powered, it squirted fuel...!

Good Hunting!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.