The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

444 Fenderless Project 444-544

Probably a Mustang II aftermarket front suspension with tubular control arms, either conventional coil springs or coilovers. Front track width will increase from approximately 52.5" to 56.5" or 58" depending on choice of rotors. I will move the front axle position forward 2" to 4".

The rear will be a trailing arm with coil springs or coilovers and a panhard bar same as stock just beefier.

I may use a Chevy S-10 truck rear axle, the track width will increase from approximately 52.5" to 54". I will use deep reversed rims to match the front track and allow for bigger tires on rear.

For the engine I am considering a V6 over a V8 since the V6 will be about 4" shorter and not intrude into foot room as much.

Maybe an automatic overdrive transmission since the shifter location on a modern manual 5 speed may not be in the most comfortable position.

All of this will be sitting on a 2" x 3" x 1/8" wall steel tubing frame that I will build.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.