The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Brake Calipers-ABS and Non-ABS 200 1993

A bit of further digging for you on the ABS vs. non-ABS master cyl turned up some useful stock brake info on Dave Barton's 240 big front brakes conversion page over on his 240turbo.com site, ref. https://www.240turbo.com/volvo240bigbrakes.html
(I can see a bunch of you now spending the rest of the evening reading up on that conversion -be sure to check out related posts on TurboBricks)

It says the master cyl primary bore is the same (22.3 mm), but the secondary bore for the front brakes is larger for the ABS master cyl (19 mm vs 15.75 mm for non-ABS).

Oh, and one correction to my story, while 740 ABS front calipers use the single piston clam shell design, the 240 ABS front calipers stayed with a 4 piston design, both pairs of pistons on the same left front or right front brake line circuit from the ABS module.
--
Dave -still with 940's, prev 740/240/140/120 You'd think I'd have learned by now






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.