The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Upgraded B18 Head Gasket Choice 120-130

What is your objective? Do you want to run 87 octane or are you prepared to run higher octane. Was the block decked to establish the correct quench band. This will determine how much static compression the engine will tolerate without detonating. Un decked with a K cam - anything in the order of 10:1 will likely require 92 octane fuel. Decked with a correct quench band and you might do 10.5:1 on 87 octane - or so I have heard people claim.

Measure the clearance volume of the combustion chamber. With that value and your swept volume value you can play with various gasket thicknesses to calculate different compression ratios. There are various CR calculators available on the Web. Cometic makes B20 gaskets in various thicknesses. I don't know whether they make B 18 gaskets. If they don't, then you are constrained to using the original gaskets and may be limited in your CR options.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.