The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B18 90 hp Engine 120-130 1963

Looks great except,
1: B18 conrods, bin them and upgrade to the early B20 rods, direct swap.
2: D cam is pointless, it flogs the the valvetrain hard without having any meaningful useage (Other than ITB) With stock springs I would use a K cam, much kinder. B20B/E/F +4° advanced, B20A +8° advanced with intake lash loosened up to .022". With high compression a K on the inlet combined with a longer duration exhaust lobe will give a bit more everywhere on an injected or twin SU car. A3 Cosworth profile works great with the stock springs.

Other stuff: I put a regular O-ring behind the stock O-rings on the oil pump pipe to prevent a cold start pop out. Upgrade to flywheel bolts & and use hardend washers under the flywheel & head bolts. It is worth a cut across the top of the head (while the valve guides are out) if you are going up to hardened washers.








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.