The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Will Reinserting Dipstick Cause New Cam Seals to Blow? S90-V90 1998

Did you put in a new oil trap/ breaker box when you did the PCV? I think you still might have a clog in your PCV.

Try the blow test. If it passes, at that point it might make sense to move on to doing a leak down test and compression test. Probably a good idea anyway. Unless the car has been seriously neglected I doubt you’ll find a problem with the compression or rings. The white block engines have bottom ends that are typically bulletproof. Usually what happens with them is with very high mileage (200k+) the valve seats start to leak some oil. That happened to my 95 850 at around 230kish.

Do you use any oil? How much? An old school test for the rings is to warm the engine thoroughly then lock into second gear on a downhill, rev the engine to 4000rpm+, hold it for a minute then release. After releasing the accelerator, look out your rear view mirror for oil smoke clouds.

--
Will I buy another Volvo??? We'll see....






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.