The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

90 240 Crank Position Sensor - OBD Not flashing 200

posted by  malloy1 on  Sun Jun 28 09:59 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 17:44 CST 2014
[RELATED]

Somebody mentioned that the OBD will not give codes if the fuel injector fuse near the battery is not powered (blown or corroded).

I checked it out. Yup-Pulled the fuse and was the same symptom:

-No fuel pump relay activating
-No spark
-OBD LED lights up when test button is pushed, but no code flashing in either the #2 or #6 pin.

I did clean the fuse and sprayed the holder and fuse with deoxit when I was cleaning the OBD box. I forgot to mention that. The car didn't run after I cleaned the OBD box and fuse holder. The fuse and holder was corroded. I'll replace the fuse and holder too.

Paul






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.