The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

sedan license plate light (aka number plate lamp) springs? 200

Once the springs have rusted through, to the point of being nonfunctional, resorting to double sided tape to hold the lamp assembly in place seems like the simplest solution. Anyone come across other solutions (e.g. aftermarket plastic or metal clips) that can be used to hold the assembly in place? Sourcing the original metal springs seems highly unlikely as the volvo parts catalog (240 series 1988-, Edition 05-1993) only lists the entire assembly. Even if the original springs were available I don't believe them to be a viable alternative as removing the remainder of the old springs from the plastic mold would be challenging. Let me know what solutions you have come up with and thanks in advance for your willingness to share your wisdom.


Springs that rust and eventually fail.


Original parts catalog


Number plate diagram from parts catalog


Springs that have seenĀ better days.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.