The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

245 correct idle after start but high after use 200 1992

This may be completely irrelevant, but I'll post it for information.

My 1991 940, B200F with LH 2.4 and M47 also idles high after I have run the car over 60mph. The reason appears to be that I no longer have the speedometer signal going into the system. I had to replace the Yazaki Speedo due to the well known issues with the capacitors. The car idles perfectly at around 750 rpm until I take it over that speed, then it idles at circa 1100rpm. To correct this I simply have to switch off and switch on again. This restores the correct idle. I can't understand the logic of why the ECU should be set up like this, but presumably Volvo did this deliberately. Prior to my removing the speedometer signal of course it worked as it should, idle returning to normal after a fast run.

Ian F






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.