The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

the old water pump r and r trick on a 2.2 4cyl 200 1992

posted by  porkface on  Sun Nov 22 12:05 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:12 CST 2014
[RELATED]

when doing the pump, i glue the gasket to the pump, let it dry, smear the block with a little grease, check the head for corrosion or pitting, a little silicone lube, not sealer, same with the o ring for the heater pipe. hang the pump to the block with 2 bolts, attach the pipe, don't tighten. with the largest dowel you can find, tighter the better, lever the pump to the head. tighten the pump bolts, criss cross. tighten the heater pipe. hepu or graf for the pump and a 1336255 seal from the dealer, the others have ALWAYS given me trouble right away or far sooner then the pumps failure. this assumes it's a 2.3, not a 2.2. good luck, chuck.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.