The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bulb Failure Sensor... What next to check??? 200 1989

Or, if you are good with soldering, you can create a bypass of the bulb failure sensor.

There is some voltage drop / current loss when electrical power passes through the bulb out or bulb failure sensor (at least you do not call it a relay).

I bypassed the bulb failure sensor using instruction by Dave Barton and Art Benstein.

Well, I found the Dave Barton info after the fact. Find it here:

240 uses the red case sensor.

https://www.240turbo.com/volvo240mods.html#bulbfailsens1

I have mismatched parking lights between the left and right so the bulb out sensor indicator dash light is on. The sensor reacts to a current flow imbalance for left and right for left and right low beam, left and right parking light side circuits, and left and right brake lights.

Hope that halps!
--
Beh.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.