The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cigarette lighter removal 200 1991

posted by  machine man on  Mon Dec 28 10:15 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:40 CST 2014
[RELATED]

Hi,

I believe there is a thin metal (stamp out) ring nut on the backside that will have to be spun to spin off the housing of the cigarette lighter.

I also believe you will have to remove two wires from the slip on spade type connectors, otherwise, you will be spinning the wires round and around.
The center post is the positive voltage wire and the more bare one is the negative side.
It will, Be nice, if they have spade blade connectors on the USB device. No cutting and splicing!

You will have more room, to see everything, if you remove four screws and two twist clips around the center console. Two are right in front of the transmission shifter.

This way you get a couple inches of slack in case you have large hands or stiff fingers like us older folks! (:-)

Phil






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.