The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can you identify this vacuum component? 1800

I agree and it sounds like the inline vacuum check valve for the brake booster came apart which is a not too uncommon occurrence especially if the it's the original check valve.

AFAIK, no one sells the exact correct inline check valve and that is Volvo's fault.

Volvo updated the brake booster check valve, but to a vacuum check valve used on 240/260. And although functionally the same, the problem is that hose barbs on the updated check valve are smaller than the original.

You can use that valve, but it requires that you over-tighten the hose clamps on brake booster and that will shorten the life of the hose.

When I discovered this problem 30 years ago, I found another check valve made by the same manufacturer that has the correct sized hose barbs.


--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.