The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bubbling coolant on coolant reservoir

I'm with the others on not opening the cap when the engine is hot. Not only does it tell you nothing about the health of the head gasket, it is potentially very dangerous.

The now lower pressure means the boiling point of water is lower and the residual heat of the engine block starts to boil water and the bubbles find their way up to the highest point. And if you're living at a somewhat higher altitude, then the boiling point of water is lower than the 100 degrees C it is at sea level.

Once the engine has cooled down fully, take the cap off the reservoir and start the engine. If straight away bubbles appear and keep coming, then you have a big head gasket leak.
Smaller leaks can be detected by the device already mentioned.

In your video, I couldn't tell if there was oil floating on the coolant, but if things start to look like this in the reservoir, it's not OK either:








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.