The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1800E mixture lean over 3000rpm 1800

HiRick, a couple observations. The 28psi spec was updated by Volvo in a service bulletin many years ago to 30 psi. Apparently breaking the seal and adjusting the MAP is a no-no. Do you have the correct MAP? Do you have the FI Fault tracing manual?

https://volvo1800pictures.com/document/fuel_injection_fault_tracer/fuel_injection_fault_tracing.pdf

Try this website. You can sign up and ask in the forum your question. They will answer in English. There’s a ton of info on there. Make sure you click on the British flag in the top right hand corner to read in English.

https://jetronic.org/en/d-jetronic

Both of those sources have been a great help on my ‘71 E. I don’t experience loss of power above 3000rpm, but I don’t have an AFR meter.

I recall reading that Djet tends to run lean on our volvos.

Good luck, and keep us posted.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.