The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1988 740 turbo fuel pump relay........FIXXED 🌝 700

Ignition switch contacts were pitted. 243000 miles of starting showed it life span of electrical demise. The other problem was the relays needed a heavier wire from the power to the contacts. Manufacturer use the thin circuit board to transfer the power.I just stripped some twisted cooper wire and soldered it from the power input to the contact side of the relay. Manufacturers use a thin strip of solder instead of a wire which inturn acted like a fuse and blew. I chased a whole lot of electrical gremils to figure this one out. Replacing the high mileage ignition switch is something I would higly address in everyones High mileage volvo. Now since replacing my ignition switch, everything gets the 12 volts it needs. My 745t has never preformed this well. I did open up the old switch and found pitfed contacts and blackened areas where they were arcing.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.