The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1995 940 Front Hub Mitchell Manual Procedure 900

My daughter's 1995 940 was in a shop that supposedly used the procedure in a Mitchell manual to tighten the front wheel 36mm hub nuts. I could not get more information about the procedure from the shop. Chilton and Haynes manuals say to tighten the nut to 74 ft-lbs and then angle tighten 45 degrees. Also, the Chilton and Haynes manuals say not to re-use the 36mm nut. The shop did re-use the nut!
I could not find anything, much less a Mitchell manual, that gave the procedure written in the Mitchell manual.
Any help with the Mitchell manual procedure tightening the front hub nuts would be appreciated and I'd sleep better knowing it was done correctly or if she should take the car to a shop that could do it correctly.
Also, does anyone have the part number of the 36mm nut used on 940s?
--
Mine:3-940s running; 1-740, 2-940 parts; dtrs:4-940s running






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.