The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1993 Front Calipers ABS / Non ABS

I would make an educated *guess* that the answer is yes. Which manufacturer- girling or bendix?

The Bendix ones I just rebuild for my 90 740 w/ABS literally have undrilled ports for the same caliper body to be made as ABS or non. Only a small passage connects the 2 pistons on mine.

For the 240 calipers with 3 bleeders ... I would not assume anything about them.

Rebuilding calipers is usually pretty simple. New seals, slide pins (if "floating" type), lots of clean fluid, some compressed air (and rags to cover things!), a fine brass brush, some 600 grit or finer sandpaper, and a few hours should do it.

If they are all sorts of corroded and pitted inside, I would hesitate, but the majority of the caliper is just a pressure vessel. If the seals seal, then the only way I can see for them to fail is to split and start leaking.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.