The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

test brake lights 900

assuming the bulb out sensor is ok
start with checking brake lights fuse 4
check for +12vdc at fuse with brake peddle down
meter ground to cigar lighter ground
+12v meter lead to leg on top of fuse check both legs

test your brake switch
+12vdc at left brake light yellow/red wire
+12vdc at right brake light yellow wire

give the grounds at each brake light an eyeball.


if the the brake lights still are kaput reconfirm the you have continuity from the
brake switch common line to bulb out sensor common leg 54S/9 and the other three legs 54L/10 54R/11 S/5 reflow the common leg if all 3 brake lights kaput.
then check continuity common to each leg with your ohmmeter.

it's tough to read this pdf. the numbers are not so clear.

bill






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.