The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

E-brake cable routing at rear axle? Between Torque Rods? 700 1990

1990 740GL Regina (4,10 rear end!)

Hey, folks. I got my rear axle swapped out almost completely, but the emergency brake cable is not routed right. It's about 1/2 inch too short. I absolutely hate these things and have a bad time with them every time.

How does the cable need to be routed from the left/right junction to the body hole? Does anyone have photos? I got told to do it in a rush and forgot to snap any photos.

Also, I found an effective cleaner for the differential label! First, mild scraping with a plastic putty knife to get the 1/4 inch of oil down to a few mm. Then either Gojo type smooth (not pumice!) type hand cleaner or the Gel type engine degreaser left to sit on the car for a week or two. Then I used some soft cloth to wipe it clean, NOT swirling it because any trapped abrasives will tear up the print. A stream of water might wash off the gunk better without any scratching.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.