The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Idle trimming screw 140-160

For Dave and Phil -- 2 of the biggest differences is that the Stromberg uses a rubber seal between the piston and the upper chamber while the SU does not (relying on a close fit between the piston and chamber) -- and the other -- the SU relies on a threaded system to raise (leaner) or lower (richer) the jet (relative to the metering needle) while the Stromberg needs special "press" tools to lower the jet from the top--or raise the jet from the bottom. Different profile needles determine the running characteristics of the mixture. SU's are measured every 1/8 inch. I don't know how Stromberg needles are measured. I have an SU reference book with hundreds, if not thousands, of needles listed with each showing every measurement. I'm 75 now--started Volvo ownership at 28 with a 1965 544 and then went through many 122 and 140 models. An SU carb in my hands is much more familiar to me than anything Volvo from about 1981 on. - Dave






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.